Dacor DRF36C500 Serie Manual Del Usuario página 30

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Adjusting the height with the snap rings
For the models with the height lever on the right-side door of the fridge, use the snaps
rings only if you cannot align the doors with the height lever.
CAUTION
• Insert only one snap ring. If you insert two or more snap rings, the rings may slip out or
make a rubbing noise.
• Keep the snap rings out of children's reach and keep them for future use.
• Do not raise the door too much. The door can contact and damage the top cover.
30
English
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 30
B
A
NOTE
The height of a door can be adjusted using
the provided snap rings, which come in
4 different sizes (1 mm, 1.5 mm, 2 mm, and
2.5 mm).
1. Check the height difference between the
doors, and then lift up and hold the door
with the lower height.
2. Insert a suitable-sized snap ring (A)
between the door grommet (B) and the
hinge as shown.
2022-04-28
10:55:33

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido