Activating Or Deactivating The Cooling Off Mode; Resetting Or Dismissing The Water Filter Replacement Alarm - Dacor DRF36C500 Serie Manual Del Usuario

Activating or deactivating the Cooling Off mode

The Cooling Off mode (also called the Shop mode) is designed for retailers to display
refrigerators on a retail floor. In the Cooling Off mode, the refrigerator's fan motor and
lights operate normally, but the compressors do not run, so neither the refrigerator nor the
freezer becomes cold.
• To activate or deactivate the Cooling Off mode, tap and hold
for 6 seconds. Then, when the display blinks, press
- When the Cooling Off mode is on, the refrigerator chime sounds, and the refrigerator
shows "0" on the fridge indicator and "FF" on the freezer indicator.

Resetting or dismissing the water filter replacement alarm

The water filter replacement icon ( ) blinks to alert the user that it is time to replace
the water filter. You can replace the water filter immediately and reset the water filter
replacement alarm, or dismiss the alarm if you want to change the water filter later.
1. Tap any button ( ,
- This step may not apply to some models.
2. Tap until the Water Filter indicator blinks.
3. Tap or to select Reset or Later.
- If you have changed the water filter, tap
alarm.
- If you want to change the water filter later and dismiss the alarm, tap
4. Wait for 5 seconds or tap
- The Water Filter indicator stops blinking.
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 41
, or ) to wake up the display.
to confirm your selection.
and
.
to reset the water filter replacement
simultaneously
.
English 41
2022-04-28 10:55:36