Samoa 530610 Guía De Servicio Técnico Y Recambio página 4

Bomba neumatica de grasa pm35, ratio 60:1
Ocultar thumbs Ver también para 530610:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
EN
REPAIR AND CLEANING PROCEDURE
CLEAN THE MUFFLER (FIG. 5)
1. Unscrew and remove the plug (51).
2. Remove the diffuser from the silencer (52).
3. Replace the felt (53) with a new one.
4. Refit the diffuser (52) together with the new
felt (53).
5. Refit the plug (51).
AIR DISTRIBUTOR (FIG. 6)
1. Unscrew the 4 screws (16) from the cover (5) and remove it.
2. Unscrew the 4 bolts (52) from the silencer (46) and remove it together with the
gasket (50) and the silencer resonator (49).
3. Using a plastic tool, gently tap the slide (31) on the side of its smallest diameter
through the motor (Fig. 6), remove the slide (31).
4. Replace slide seals 2x(32), (33) and (45), or replace the complete slide (31) with
its factory installed seals (kit 539505). This is the recommended option to ensure
that the seals are correctly installed.
52
46
Fig. 6
AIR DISTRIBUTOR SEALS (FIG. 7)
1. Remove the 3 bolts (1) and then the cap (2).
2. Remove the part (3) and its o-ring (4). Remove o-ring (4) and replace it later by a new one.
3. Take away the 2 curved keys (5).
4. Unscrew the 5 bolts (7) and take tehm away along with their washers (6).
5. Pull upwards the head of the motor (18) till it´s free from the rest of the pump.
6. Pull upwards the part (10) till it´s out of the head of the motor.
Remove o-rings (3x8 and 9) and replace them later by new ones.
7. Remove o-rings (19), (20), 4x(21), (22) and the one (8) below the washer (23). Replace
them later by new ones.
8. Remove the 4 bolts (50), pull upwards the part (24) and then remove o-rings (25) and (26).
Replace them later with new ones.
9. Pull upwards the cylinder (36) and replace o-rings (25), (26) and (31).
10.Reassemble in reverse order, applying thread locker in part (3).
NOTE: all these seals are included in the available kit 539502.
4
853 823 R. 03/22
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Fig. 5
50
49
53
52
32
32
45
33
31
38
5
51
1
2
3
4
5
6
7
8
9
10
8
18
19
20
8
24
25
16
26
27
30
31
32
33
34
35
37
38
39
40
39
42
41
25
26
Fig. 7
49
50
21
22
23
28
29
36

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

530611530620530621530630530631

Tabla de contenido