Samoa 530610 Guía De Servicio Técnico Y Recambio página 5

REPAIR AND CLEANING PROCEDURE
LOWER SEALS KIT (FIG. 8)
1. Take away the air motor from the lowers, as described previously.
2. Unscrew the bolts (50) and remove the body (44).
3. Unscrew the scraper nut (41) and extract the washer (38). Replace
seals (38), (39) by new ones.
4. Take away the assembly consisting of parts (59), (61), (65) and (67)
from the lowers.
5. With the tube (68) secured on a vise, unscrew the tube (79).
6. Extract the parts 2x(42), (75) and (76). Remove the circlip (74) from the
valve (78) and replace the components (75), (76) and (77) by new ones.
7. Unscrew the part (71) and replace the seals (69) and (70) by new ones.
8. Assemble again in reverse order, replacing all metallic seals 4x(42).
9. All necessary seals are included in the available kit 534601.
DETAIL C
75
74
62
63
64
65
PARTS LIST / TECHNICAL DATA / DIMENSIONS
SPARE PARTS SEE PAGES: 27, 31, 32 and 33.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
38
39
40
39
DETAIL B
DETAIL D
Fig. 8
CLEANING OR REPLACING THE LOWERS VALVES
1. Disassembling the lowers as described previously, the fluid valves can
be easily accessed.
2. Lower valve: parts from (73) to (76). Kit 534602.
3. Upper valve: parts from (62) to (65). Kit 534603.
NOTE: to unscrew the upper valve (65), secure it in a vise and unscrew
the rod (61) by grabbing it in the pin (60) area in order to avoid
damaging the quality of the surface intended for sealing.
36
35
37
38
39
40
39
42
41
59
44
50
49
60
61
65
66
67
EN
42
68
42
69
70
71
42
72
73
74
75
42
76
79
77
78
5
R. 03/22 853 823