Spare Parts; Optional Kits - Husqvarna FS 4800 D Manual De Instrucciones

c) Change the ENGINE GEARBOX PULLEY from 4.50"
(114.mm) diameter to 4.1" (105mm).
d) Shift the GEARBOX SHIFT LEVER (-O) from
 to 1.
information in operation manual.
54 19 06-00, 54 0 65-46, 54 0 65-49 are required).
See the "Decals and Locations" page of this manual for
more information.
See Blade Size Conversion charts for specific
information.
WARNING: Serious injury can occur to the
operator or people in the work area if the
rotational speed (n/min) of the DIAMOND
BLADE (2E) exceeds the maximum speed (n/
min) marked on the DIAMOND BLADE (2E).
WARNING: After Shifting Gearbox, lower
GEARBOX DETENT KNOB (3-2P) or three-
speed ENGINE GEARBOX (3-2A) could
be damaged!
If gearbox seems hard to shift, a slight movement of the
blade shaft may ease movement of GEARBOX SHIFT
LEVER (-O) into proper gear. Never shift the Gearbox
(-A) with engine running!
Two Neutral positions are available in the Three Speed
ENGINE GEARBOX (-A). This gearbox can be shifted
into neutral if the blade rotation needs to be eliminated
while the engine is running. If the machine is equipped
with the optional BLADE CLUTCH (1V), the BLADE
CLUTCH SWITCH (1V) can be moved to the "0" (OFF)
position to eliminate blade rotation while the engine
is running.
15 Accessories
BLADE GUARD CONVERSION KITS:
Use the proper size blade guard for the particular diamond
blade size being operated. The following blade guards
are available for these diamond blade sizes:
Guard
6" (900mm)
0" (750mm)
6" (600mm)
18" (450mm)
14" (50mm)
See Blade Size Conversion charts for specific
information.

OPTIONAL KITS:

54 18 11-17* Dual Light Kit
58
Blade Sizes
4" - 6" (600 - 900mm)
18" - 0" (450 - 750mm)
14" - 6" (50 - 650mm)
14" - 18" (50 - 450mm)
14" (50mm)
16 Repairs
We carry out all repairs in the shortest possible time and
at the most economical prices. (See back page for our
address and phone numbers.) Contact you authorized
dealer concerning maintenance and repairs.
17

Spare Parts

For quick supply of spare parts and to avoid any lost time,
it is essential to quote the data on the manufacturers
description(s) to be replaced with every order.
Please reference Parts Lists manual (54 0 10-8):
(If you do not have a Parts List Manual, please call TOLL
FREE 1-800-88-5040 in USA, or for International, call
+1-91-98-100.)
The instructions for use and spare parts found in this
document are for information only and are not binding. As
part of our product quality improvement policy, we reserve
without prior notice.
The manufacturer accepts no responsibility
.