Commissioning And Operation - Klarstein AMAZONIA 6 SECRET Manual De Instrucciones

COMMISSIONING AND OPERATION

Starting the washing process
1. Draw out the lower and upper basket, load the dishes and push the basket back. It
is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket.
4. Make sure that the water supply is turned on to full pressure.
5. Open the door, Press the Power button.
6. Choose a program, the responsing light will turn on. Then close the door, the
dishwasher will start its cycle.
Changing the programme
A program can only be changed if the device has been running for a short time.
Otherwise the dishwasher detergent may already have been released and the
dishwasher may already be full of water. If this is the case, the appliance must be reset
and the dispenser must be refilled with dishwashing detergent. Proceed as follows to
reset the dishwasher:
1. Open the door a little to stop the dishwasher. After the spray arm stopped working,
you can open the door completely.
2. Press Program button more than three seconds the machine will be in program
selection mode.
3. You can change the program to the desired cycle setting.
EN
55