Proper Use; Symbols On The Machine; Safety Instructions - Kärcher HD 13/35-4 Cage Manual De Instrucciones

16 Pressure/ quantity regulation
17 Accessory compartment
18 Oil drain screw
19 Water connection with filter
20 Oil level indicator
21 High pressure connection
22 Manometer
23 Power nozzle with covering nut
24 Spray lance
25 Strut for crane loading

Proper use

Use this high pressure cleaner exclusively for:
Cleaning machines, vehicles, buildings,
–
tools.
with accessories and spare parts ap-
–
proved by Kärcher.

Symbols on the machine

According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
16
High-pressure jets can be
dangerous if improperly
used. The jet must not be
directed at persons, ani-
mals, live electrical equip-
ment or at the appliance
itself.
Danger of damage to the
machine on account of fro-
zen water! Store the appli-
ance in a heatedroom
during winter or empty it.
Risk of hearing impair-
ment. Always use proper
ear-protection aids while
working with the appliance.
Risk of injury! Wear safety
goggles.
Caution
Always connect the system separator to
the water supply, never directly to the appli-
ance!

Safety instructions

Danger or hazard levels
Danger
Immediate danger that can cause severe
injury or even death.
Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
High pressure hose
Danger
Risk of injury!
Only use original high-pressure hoses.
–
The high-pressure hose and the injec-
–
tion system must be suitable for the
maximum operating pressure given in
the Technical Data.
Avoid contact with chemicals.
–
Check the high-pressure hose daily.
–
Do not use hoses with kinks.
Stop using the high-pressure hose if the
external wire layer is visible.
Do not use the high-pressure hose any-
–
more if the winding is damaged.
Lay the high-pressure hoses in such a
–
way that no vehicle can drive over it.
Do not use high-pressure hoses that
–
have been driven over, kinked, pressed
or bent even if there is no externally vis-
ible damage.
Store the high-pressure hoses in such a
–
way that they are not subject to any me-
chanical load.
– 2
EN