LUND REVOLUTION 86521300 Instrucciones De Instalación página 3

PROCEDURE:
REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY. CUTTING MAY BE REQUIRED. INSTALLATION MAY INTERFERE WITH FRONT
MOUNTED SENSORS.
1. Start installation from under the front of the vehicle.
2. Determine if the vehicle is equipped with tow hooks. IMPORTANT: Tow hooks cannot be reinstalled with
the Bull Bar.
Tow Hook equipped vehicles:
a. Remove the plastic cover attached to the tow hook, (Figure 1). Next, remove the tow hook from the
bottom of the frame, (Figures 2 & 3).
b. Proceed to Step 3.
(Fig 1) Example of Tow hook
Front
(Fig 3) Driver/left mounting location
(Fig 2) Remove plastic cover
surrounding tow hook
2
I-Sheet Number 20263 Rev.A
REVOLUTION™ BULL BAR
2019 FORD RANGER