Removing Fried Food - Silvercrest SHFD 1400 B2 Instrucciones De Uso

7.6 Removing fried food

RISK OF BURNS!
Use pot holders or protective gloves, if you have to touch the pan 7
►
or the frying basket 2.
Once the frying process is finished, you will hear several beeps and
" " appears on the display z. The appliance switches automatically
into standby mode.
1) Switch off the appliance by pulling out the mains plug.
2) Have a heat-resistant base for the pan 7 and the frying basket 2
and a container, e.g. plate or bowl, ready for the fried food.
3) Pull the pan 7 out of the housing 8 by the handle 6.
CAUTION – PROPERTY DAMAGE!
Never disconnect the frying basket 2 from the pan 7 while holding
►
it in your hand, otherwise it will fall. Before doing this, place the
pan 7 on a heat-resistant surface.
4) Push the unlock protection 4 in the direction of the arrow so that
the release button 5 underneath it is revealed.
5) Press the release button 5 and, at the same time, lift the frying
basket 2 upwards out of the pan 7.
6) Place the frying basket 2 on a heat-resistant surface.
│ GB │ IE
■ 16
SHFD 1400 B2