Functional Description - Milwaukee 2649-20 Manual Del Operador

Ocultar thumbs

Contenido

página de 21

/ 21
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

• Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a fire.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acciden-

tally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging im-

properly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES

FOR SANDERS

• Collected sanding dust from sanding surface

coatings such as polyurethanes, linseed oil, etc.

can self-ignite in the sander dust bag or else-

where and cause fire. To reduce the risk of fire al-

ways empty the dust bag frequently (10-15 minutes)

while sanding and never store or leave a sander

without totally emptying its dust bag. Also follow the

recommendations of the coatings manufacturers.

•

To reduce the risk of injury, when

WARNING

working in dusty situations, wear

appropriate respiratory protection or use an

OSHA compliant dust extraction solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

OPM

Orbits per Minute (OPM)

UL Listing for Canada and U.S.