All manuals and user guides at all-guides.com
GENERAL
This symbol indicates WARNING. Per-
sonal injury and/or damage to property
may result if the instructions are not
followed carefully.
You must read these instructions for
use and the accompanying pamphlet
"SAFETY INSTRUCTIONS" careful-
ly, before starting up the machine.
SYMBOLS
The following symbols appear on the machine.
They are there to remind you of the care and atten-
tion required in use.
This is what the symbols mean:
Warning!
Read the instruction manual and the safety
manual before using the machine.
Warning!
Watch out for discarded objects. Keep on-
lookers away.
Warning!
Always wear hearing protectors.
Warning!
This machine is not designed to be driven
on public roads.
The machine, equipped with original ac-
cessories, may not be driven on slopes
greater than 10º in any direction.
Warning!
Risk of burn injuries. Do not touch the si-
lencer.
ENGLISH
CONTROLS AND
INSTRUMENTS
Items 1 - 13, see figures 1 - 3.
1. IMPLEMENT LIFTER
A pedal for raising front-mounted implement to
the transport position.
To lift up the implement, press the pedal down as
far as it will go. Then release the pedal, the imple-
ment lifter is now locked in the raised position.
To lower the implement, press the pedal down so
that the lock is released. Lower the implement lift-
er to the working position by slowly lifting your
foot from the pedal.
2A. SERVICE BRAKE/CLUTCH
(Master - Senator)
A pedal that combines both service brake and
clutch. There are 3 positions:
1. Pedal released – forward drive
engaged. The machine will
move if a gear is engaged. Serv-
ice brake not activated.
2. Pedal depressed halfway –
forward drive disengaged, gear
shifting can be performed. Serv-
ice brake not activated.
3. Pedal fully depressed – for-
ward drive disengaged. Service
brake fully activated.
NOTE! You must never regulate the operating
speed by slipping the clutch. Use a suitable gear in-
stead, so that the right speed is obtained.
2B. SERVICE BRAKE
(President - Royal)
A pedal that acts on the machine's braking system.
There are 3 positions:
GB
43