Gymrex GR-MG74 Manual De Instrucciones página 49

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 185
1. Remove the ball pin [7]. Deploy the main frame and secure in position by
reinserting the ball pin into the respective hole.
2. Attach the support legs to the respective mating pins (the rear support leg goes
to the back of the flywheel assembly cowl and the front support leg goes to the
frame lower end).
3. Insert the handlebar tips with the control panel into the respective holes and
tighten to secure. Connect the wiring.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gr-mg75Gr-mg78Gr-mg79

Tabla de contenido