Gymrex GR-MG74 Manual De Instrucciones página 56

1. Install the batteries in the battery holder in the back of the control panel – mind
the polarity. The display will read "0" for every setting.
2. Press the MODE dial. First, the control panel prompts you to enter your body
height, body weight, and age. The prompt messages are displayed in the top bar:
HEIGHT, WEIGHT, AGE.
3. Having made your inputs, the top bar will display "SCAN". The setting to be
input begins to flash. Each setting value can be input by operating the dial: turn it
counter-clockwise (towards DOWN) to reduce the value; turn it clockwise (towards
UP) to increase the value.
4. Confirm by pressing the MODE dial. The display control panel goes to the next
setting. You can enter every setting as required, apart from speed.
Parameter designation Setting range