Parameter Setting & Calibration; Key Function; Program Parameters - Baxtran CHS Serie Manual De Usuario

6. paramETEr SETTIng & CaLIbraTIon

6.1 KEY FUNCTION

KEY FUNCTION
▪ Move digits
Set value up
▪

6.2 PROGRAM PARAMETERS

operation
Press MODE key twice
Press ENTER
Press ZERO to choose
Press ENTER to confirm
Press ZERO to choose
Press ZERO to choose
Press ENTER to confirm
Press ENTER to confirm
Press ZERO to confirm
44
6.1 Key funCtion
6.2 proGram parameters
6.3 CaliBration
KEY FUNCTION
▪ Storage and exit
confirm
▪
Display
SETUP
confirm, enter parameter setting program
New chS, the screen display fS=06 , if
FS=06
display capacity.
choose capacity ,the 02/03/05/06/10/15/20/30/50/60/75 circularly,
FS=02
take cap:2000kg as example, choose fS=02.
New chS
Id=02
display calibrated division.
choose division,the screen display 01/02/05/10/20 circularly.
Id=01
2000kg
New chS, the screen display Pt=0, if
Pt=0
screen display calibrated decimal position.
choose decimal position, the screen display 0/1/2/3 circularly,
Pt=0
0=xxxxx, 1=xxxx.x, 2=xxx.xx, 3=xx.xxx, cap.2000kg The
choose Pt=0
Display zero range , A:zero range by hand; B:zero range automatica-
Ab=24
lly, 0~5 total 6 options: 0=0%f. S; 1=2%f.S; 2=4%f.S;
3=10%f.S; 4=20%f.S; 5=50%f.S generally Don't change
New chS, the screen display cd=11,if
Cd=11
screen display calibrated value.
C: zero-tracking range, 0~5 total 6
0=0d; 1=0.5d; 2=1d; 3=1.5d; 4=2d; 5=2.5d
d: display speed, 0~2 total 3
Cd=11
0=slow; 1=average; 2=fast;
before calibration,set cd=00,
after calibration, set cd=11 again,
generally choose cd==11 when ex-stock.
USER MANUAL CHS
illustration
, the screen display Id=02, if
chS division is 1kg, so choose Id=01
options;
En
chS calibrated, the screen
chS calibrated, the screen
chS calibrated, the
chS
chS calibrated, the
options;