Tool Dimensions - Stanley AV 50 Manual De Instrucciones Y Servicio

E N G L I S H
Noise values determined according to noise test code ISO 15744 and ISO 3744
A-weighted sound power level dB(A), LWA
A-weighted emission sound pressure level
at the work station dB(A), LpA
C-weighted peak emission sound pressure level
Vibration values determined according to vibration test code ISO 20643 and ISO 5349
Vibration emission level, a

2.3 TOOL DIMENSIONS

All dimensions are shown in millimetres.
Refer to the table on page 7 for the nose assembly dimensions 'A' and 'B' .
The tool is fitted with two Hydraulic Hoses and an electrical Control Cable, 0.6m in length. Additional hydraulic hose
and cable extension lengths are available to order separately as required. Refer to the table below for the available hose
assembly lengths and associated part numbers.
8
dB(C), LpC,peak
:
hd
Declared vibration emission values in accordance with EN 12096
HYDRAULIC HOSE ASSEMBLY
PART NUMBER
07008-00448
07008-00449
07008-00450
O R I G I N A L I N S T R U C T I O N
Uncertainty noise: kWA = 3.0 dB(A)
Uncertainty noise: kpA = 3.0 dB(A)
Uncertainty noise: kpC = 3.0 dB(C)
Uncertainty vibration: k = 0.27 m/s
HOSE LENGTH
5 Metre
10 Metre
15 Metre
AV50
95.4 dB(A)
84.4 dB(A)
133.7 dB(C)
AV50
0.536 m/s
2 2