Recharge The Fuel - Ravelli R 1000 Pro Manual De Uso Y Mantenimiento

⚠

Recharge the fuel

⚠
Use only wood pellets, the characteristics shown in this manual.
During pellet loading prevent the pellet bag from coming into contact with hot surfaces.
��
It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of
the hopper.
Recharge by extracting the fireplace
To load the pellets inside the hopper, proceed as described below:
step
1 Turn off the fireplace and wait for it to cool completely
2 Extract the fireplace (follow the steps shown in the paragraph "How to extract the fireplace")
3 Pour the pellets into the hopper
4 Reinsert the fireplace, making sure the locking mechanism engages.
⚠
You can hear when coupling occurs, as it makes a "clicking" sound.
Before extracting the fireplace and loading the pellets, make sure that the fireplace is off and completely cold.
Recharge with drawer (optional kit)
To load the pellets inside the hopper, proceed as described below:
step
1 Open the drawer
2 Pour the pellets into the drawer and push it all the way with the tool (a)
3 Close the drawer
Recharge with loading kit and / or from the opening of the chimney cladding
To load the pellets inside the hopper, proceed as described below:
step
Pour the pellets into the hopper, through the loading kit or directly from the opening.
1
If the loading kit is not used, be careful that the pellets do not fall out of the hopper.
Use and maintenance manual R 1000 Pro
EN
Rev.1 29/07/2021
Pag.21
a