Publicidad
Step 15
To make adjustments to the drawers, loosen SCREW #4
å
in the SLIDES a 1/4 turn, then turn the CAM clockwise or
counter-clockwise. Notice how the drawer raises or lowers
as you turn the CAM. The higher the screw in the oblong
hole, the higher your drawer front will be. The lower the
screw, the lower the drawer front. By adjusting the drawers
this way, it will help the DRAWER FRONTS line up better
when closed. Tighten the SCREW when fi nished with
adjustments.
NOTE: Please read the back pages of the instruction
å
booklet for important safety information.
This completes assembly. Clean with your favorite furniture
å
polish or a damp cloth. Wipe dry.
And to celebrate, why not share your success story?
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
The higher the screw in the oblong hole, the
higher your drawer front will be. The lower
the screw, the lower the drawer front.
www.sauder.com/services
Cam
401444
Page 19
Publicidad
