Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (O) into the large holes in the RIGHT END (A2)
and LEFT END (B). Repeat this step for the BOTTOM (D)
and BACK (E).
(12 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
O
A2
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
401444
Page 5
Publicidad
