KTM 22103990044 Instrucciones De Montaje página 32

5 ASSEMBLY
14
–
Mount right retaining bracket
(included) and bushing
yet.
Guideline
Screw, footrest
bracket
Info
If the center stand is installed, bushing
502616-01
mounted.
–
Mount and tighten screw
(included) and nut
Guideline
Screw, retaining
bracket
–
Tighten screw
Guideline
Screw, footrest
bracket
–
Route hose
hole on the engine guard.
Info
If the original angle piece is still on the hose, it
must be removed beforehand.
502617-01
Assembly with center stand
–
Mount right retaining bracket
8
screw
Guideline
Screw, footrest
bracket
–
Mount and tighten screw
(included) and nut
502618-01
Guideline
Screw, retaining
bracket
6
(included) with screw
bo
(included), but do not tighten
M10x45 45 Nm (33.2 lbf ft)
bm
(included) with washer
bn
(included).
M8x20
8
.
M10x45 45 Nm (33.2 lbf ft)
dl
of the activated carbon filter through the
6
(included) and
, but do not tighten yet.
M10x45 45 Nm (33.2 lbf ft)
bm
(included) with washer
bn
(included).
M8x20
8
Loctite 243™
®
bo
is not
bl
15 Nm
(11.1 lbf ft)
Loctite ® 243™
Loctite ® 243™
bl
15 Nm
(11.1 lbf ft)