Safety Regulations - EINHELL RT-HP 1750 TR Manual De Instrucciones

Anleitung_RT_HP_1750_TR_SPK7__ 12.02.13 12:38 Seite 16
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
General safety regulations and
accident prevention
It is essential that you read the safety regulations and
operating instructions in their entirety and follow the
information contained therein in order to eliminate the
possibility of an accident or potentially dangerous
situation from occurring while working with the high-
pressure cleaner.
The electrical connection must be installed by an
n
electrician in accordance with IEC 60364.
The power plug must be plugged into a properly
n
installed and earthed socket outlet with
connected earth-leakage circuit breaker (30 mA).
Always check the device, the mains cable and the
n
plug before using the high-pressure cleaner. Only
operate the device when it is in good working
order and has not been damaged in any way.
Damaged parts must be immediately replaced by
a qualified electrician.
Always pull the power plug out of the socket outlet
n
before doing any work on the high-pressure
cleaner, before changing the nozzle and
whenever the cleaner is not being used.
Only use suitable extension cables when working
n
outdoors. Extension cables must have a minimum
cross-section of 1.5 mm 2 . The plug connections
must have earthing contacts and be rainwater-
protected. Cables over 10 m in length must have
a cross section of at least 2.5 mm
Warning! This device was developed to be used
n
with cleaning agents supplied or recommended
by the manufacturer. The use of any other
16
cleaning agents or chemicals can negatively
affect the safety of the device.
Warning! Do not use the device when other
n
persons or animals are in the near vicinity unless
they are wearing appropriate protective clothing.
Warning! High-pressure jets can be dangerous
n
when the cleaner is not used properly. Do not
direct the jet toward persons, animals, live
electrical equipment or the device itself.
Do not direct the jet toward yourself or others in
n
order to clean clothes and footwear.
Do not allow the high-pressure cleaner to be used
n
by children or unauthorized persons.
Warning! High-pressure hoses, fittings and
n
couplings are important components that help to
ensure device safety. Only use high-pressure
hoses, fittings and couplings that are
recommended by the manufacturer.
In order to ensure the operational safety of the
n
device, only use genuine manufacturer's
replacement parts or parts that have been
approved by the manufacturer.
Do not operate the device if the mains cable or
n
other important parts of the device - e.g. safety-
related elements, high-pressure hoses, spray
pistol - are damaged.
Warning! Unsuitable extension cables can be
n
dangerous.
Do not pull or carry the electric tool by its mains
n
cable. Protect the mains cable from becoming
damaged by oil, solvents and sharp edges. Do
not pull or carry the electric tool by its mains
cable.
Keep your place of work tidy.
n
Ensure that the switch is turned off when
n
connecting the unit to the power supply.
Wear suitable work clothes.
n
Check your high-pressure cleaner to ensure that
n
it is in good working order. If the cleaner is not
functioning properly, have it checked by an
authorized professional. Have all maintenance
and inspection work carried out only by a
qualified electrician or ISC GmbH.
The water jet that emerges from the high-
n
pressure nozzle produces a „kickback" on the
spray pistol. Therefore, make sure that you have a
solid footing and that you have a firm hold of the
pistol grip. In order to protect yourself from
possible flying objects (that are released due to
the high pressure), wear suitable protection gear.
Use cleaning agents sparingly. Observe the
n
dosing instructions of the manufacturer.
The high-pressure jet can damage vehicle tires
n
2 .
and tire parts. Keep a distance of at least 30 cm
from the object being cleaned.
If there is a power failure while you are using the
n