Cleaning And Maintenance; Disposal - Parkside PMB 1100 B2 Traducción Del Manual De Instrucciones Original

♦ If the saw blade
ance immediately.
♦ Do not twist the saw blade
the cut.
♦ Ensure that the appliance is always stable
and secure. For extra safety, you can secure
the appliance in a suitable location. There are
4 drill holes in the housing foot that can
be used for attachment to a secure and level
surface. Feed a suitable fixing material that
is appropriate for the surface (not supplied)
through the 4 drill holes
to the surface using the fixing material.
WARNING! RISK OF INJURY!
►
Do not remove the workpiece until the saw
has come to a standstill.

Cleaning and maintenance

WARNING! RISK OF INJURY!
► Always remove the power plug from the
wall socket before carrying out any work
on the appliance.
■ Store the appliance and the saw blades in a
dry and dust-free location.
■ The appliance must always be clean and free
of oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ The carbon brushes should only be replaced
by the service centre or an authorised specialist
workshop.
■ Never obstruct the ventilation openings.
■ Remove any adhering sawdust with a brush.
NOTE
► Unlisted replacement parts (such as carbon
brushes, switches, saw blades) can be
ordered via our service hotline.
PMB 1100 B2
blocks, switch off the appli-
while making
. Fix the appliance

Disposal

Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The pack-
aging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
The product and its packaging are recyclable.
They are subject to an extended manufacturer
responsibility and will be collected separately.
GB │ IE │ 9 ■