Cleaning Tools - Uline SANITAIRE EON QUIET CLEAN Manual Del Usuario

VACUUM CLEANER HEIGHT SETTING
WARNING! Avoid injury. Keep loose clothing,
hair, fingers and all other body parts away
from any moving part (such as the revolving
brush). Turn vacuum off and unplug before
changing the vacuum cleaner height setting.
1. Set height adjustment knob to lowest setting for
maximum cleaning. If vacuum is hard to push, turn
knob to next higher setting.
2. The brushroll must reach the carpet for effective
cleaning.
Figure 9
Carpet Height

CLEANING TOOLS

1. Grasp wand handle grip to lift wand up and out of
channel. Push tool onto end of wand and stretch out
the hose. (See Figure 10)
• Use crevice tool for corners, baseboards and
cushions.
• Use upholstery tool for stairs and cushions.
Figure 10
PAGE 5 OF 27
OPERATION CONTINUED
Recommended Examples
Setting of Carpet
Position 1-2
Low Pile
Medium Pile
Position 3
Position 4
High Pile
2. To use the hose without the wand, pull wand handle
from docked position. Push lever and pull hose out
of wand. Attach desired tool. (See Figure 11)
Figure 11
3. After cleaning, return tools to storage position and
place hose end back into wand.
BAG FULL/CLOG INDICATOR
1. The red warning light at the base of the vacuum
indicates a full bag or a blockage. (See Figure 12)
Figure 12
2. Turn vacuum off and unplug.
3. Check to see if dust bag is full. If yes, replace it.
4. If bag is not full, check for blockage in the hose,
brushroll or nozzle head near the vacuum's base.
0421 IH-7147