Factory Settings; Types Of Alarm; Table 2: Factory Settings; Table 3: List Of Alarms - DAB EVOPLUS SMALL 40/180 M Instrucciones Para La Instalación Y El Mantenimiento

13.

FACTORY SETTINGS

Parameter
Regulating mode
Twin operating mode
Pump start control

Table 2: Factory settings

14.

TYPES OF ALARM

Alarm Code
e0 - e16; e21
e17 - e19
e20
e22 - e31
e32 - e35
e37
e38
e39 - e40
e46
e42
e56
e57
e58

Table 3: List of alarms

15. DISPOSAL
This product or any part of it must be disposed of correctly:
1. Use public or private local systems for waste collection
2. If that is not possible, contact Dab Pumps or the nearest authorised service workshop
INFORMATION
Frequently asked questions (faq) on the ecodesign directive 2009/125/ec establishing a framework for the
setting of ecodesign requirements for energy-related products and its implementing regulations:
http://ec.europa.eu/enterprise/policies/sustainable-business/documents/eco-
design/guidance/files/20110429_faq_en.pdf
Guidelines accompanying
http://ec.europa.eu/energy/efficiency/ecodesign/legislation_en.htm - see "circulators"
ENGLISH
= Proportional differential pressure regulation
ON
Alarm Symbol
Internal Error
Short Circuit
Voltage Error
Internal Error
Electronic system excess temperature
Low voltage
High voltage
Pump blocked
Pump Disconnected
Dry operation
Motor excess temperature (motor protector trips)
Frequency of PWM external signal less than 100 Hz
Frequency of PWM external signal greater than 5 kHz
commission regulations
31
Value
= Alternate every 24h
Alarm Description
implementing the ecodesign directive: