Servicing Flush Valve; Cefiontect® Cleaning Instructions - Toto CST646F Manual De Instrucciones Y Del Propietario

1. Turn off water supply and flush the toilet.
2. Remove the tank lid and place it upside down on a clean surface.
3. Note the orientation of the flush valve for reassembly.
4. Turn the upper half of flush valve counter-clockwise and pull it up to
remove it (see ill. 1).
5. Remove the rubber seal gasket and rinse under running water to clean
(see ill. 2).
6. Place the gasket back on the flush valve (see ill. 3).
7. Install the flush valve back on the base.
8. Rotate the flush valve so that the partial flush button is on the right and
the full flush button is on the left.
9. Carefully, install the tank lid back on the tank.
10. Flush the toilet several times using each push button to verify proper
operation. Check for leakage.
ill. 1
CEFIONTECT® MAINTENANCE INSTRUCTIONS
WHAT IS CEFIONTECT®?
CEFIONTECT® is TOTO's super-smooth permanent glaze that prevents debris
from sticking to surfaces. Products with the letter "G" in the number have the
CEFIONTECT® glaze. This glaze, along with regular cleaning, will help keep your
TOTO product in pristine condition.
NOTE:
For best results to keep your Toto product with CEFIONTECT® clean:
• Lavatory: Use a mild dish detergent with a clean, soft cloth.
• Toilet: Use a gel based cleaner with a soft bristled-plastic brush.
• Don't use cleaners, polishing powders or detergents that have gritty or
coarse particles.
• Don't use bleach, chemical thinners or products that have acid or
alkaline detergents listed as ingredients.
• Don't use metal scrub brushes or steel wool.
Following these instructions will ensure that your TOTO product with the
CEFIONTECT® glaze will always stay intact, keeping your product like new
for years to come!
SERVICING THE FLUSH VALVE
ill. 2
ill. 3
8
No CEFIONTECT®
With CEFIONTECT®