Airwell FVVA-025N-01M22 Manual De Operación Y De Instalación página 16

Installation Procedures
Open the intake grill
(1) Push the embeding switch according to the direction of the arrowhead.(Refer to Figure 2)
(2)Turn into the intake grill according to the direction of the arrowhead.(Refer to Figure 3)
Remove the Side cover
(1) Remove the screw.
(2) Push the Side cover according to the direction of the rrowhead.
(3) Then remove the Side cover.
Cut intake grill for drain pipe
(1) Tools:Knife or Pliers.
(2) Cut the intake grill before installing the drain pipe,Then,pass the drain pipe through the hole.As the following
schematic.
Figure 3
Location of the cut
8
Figure 2
Side cover
screw
After removal