SICK CMB Serie Instrucciones De Uso página 22

OPERATING INSTRUCTIONS
en
22 O P E R A T I N G I N S T R U C T I O N S | CMB
Q = digital output
L1
C = IO-Link communication
MF = multifunction
L+ = supply voltage (U )
V
M = ground
Operation in IO-Link mode: Connect the device to a suitable IO-Link master. Integrate
into the master or into the controller using IODD/function block. The green LED flashes
on the sensor. IODD and function block are available to download from
under the part number.
Operation in IO-Link mode:
Connect the device to a suitable IO-Link master. Integrate into the master or into the
controller using IODD/function block. The green LED flashes on the sensor. IODD and
function block are available to download from
DC: 10 ... 36 V DC, see "Technical data", page 24
Table 3: DC
CMBxx-
1 = BN
2 = WH
3 = BU
4 = BK
Target influence
> 1 sec.
> 1 sec.
Figure 3: Object influences
www.sick.com
xxxPPEC0SA00
+ (L+)
MF
- (M)
Q / C
L1
2 1
3 4
> 1 sec. > 1 sec.
> 1 sec. > 1 sec.
www.sick.com
under the part number.
xxxPPEW2SA00
+ (L+)
MF
M
Q / C
L1
0.34 mm 2 / AWG22
Stable ON
Output ON
Output OFF
Stable OFF
Time
Green LED ON
Yellow LED ON
Output NO
Output NC
Dust alarm NO
> 2 sec.
Dust alarm NC
> 2 sec.
8027571/2022-03-07 | SICK
Subject to change without notice