Installation
Safety
Danger due to work that has been carried out incorrectly.
This can result in severe personal injury and damage to property.
▶
▶
▶
Danger from electric current.
An electric shock can be fatal.
▶
▶
▶
▶
▶
▶
Danger from machines falling or toppling over.
This can result in severe personal injury and damage to property.
▶
▶
14
WARNING!
All the work described below must only be carried out by trained and qualified per-
sonnel.
Fully read and understand these Operating Instructions.
Fully read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
Before starting the work described below: Turn the power source mains switch to the
"O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all work
has been completed.
If present: Turn the mains switch of the auto-transformer to the "O" position.
If present: Unplug the auto-transformer from the mains.
If present: Ensure that the auto-transformer remains disconnected from the mains
until all work has been completed.
WARNING!
Place the device on a solid, level surface.
Check all screws are secure after fitting.