Preparation - Kobalt LK20175 Manual De Instrucciones

• This air compressor is intended for use on a
circuit that has an outlet like the one shown in
Figure 0 (120V grounded outlet). It also has a
grounding pin like the one shown. This product
must be grounded.
• Never use an electrical adapter with this grounded
plug.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
This product has been shipped completely assembled.
WARNING:
If any parts are missing, do not operate the compressor or air tools until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any
such alteration or modification is misuse and could result in a hazardous condition leading to possible
serious personal injury.
Attaching hose
• Insert the hose (not included) into the quick
coupler (G) already installed on the compressor
(see Fig. 1).
WARNING:
Do not attach any tools to the open end of the hose
until start-up has been completed.
• Firmly grasp the open end of the hose; hold
facing away from yourself and others.
0
grounding pin
1
G
10
outlet