Beninca ONE.2WB-MS Manual De Instrucciones página 11

Mode LED Function
0 Off No function
Press the button P
1 Red Memorise channel 1
Press within 3 secs the button P
2 Green Memorise channel 2
Press within 3 secs the button P
Memorise automat-
3 Orange ically channels 1
and 2
Press within 3 secs the button P
Red
4 Set channel 1 times
Blinking
Press within 3 secs the button P
Green
5 Set channel 2 times
Blinking
Press within 3 secs the button P
0 LED Off No function
TABLE 1
Operations
Normal status.
The red LED will light up, wait 3 secs, the LED will go out and light up again, press within 5 secs the
button on the transmitter to associate with channel 1.*
The green LED will light up, wait 3 secs, the LED will go out and light up again, press within 5 secs the
button of the transmitter to associate with channel 2.*
The orange LED will light up, wait 3 secs, the LED will go out and light up again, press within 5 secs
any button on the transmitter.
Button 1 will be associated with channel 1, button 2 with channel 2.*
The LED will give 5 rapid blinks. If button P is pressed during these 5 blinks the next mode is entered.
After the 5 rapid blinks the Times menu is entered. See section "Times Mode" - Table 2
The LED will give 5 rapid blinks. If button P is pressed during these 5 blinks the next mode is entered.
After the 5 rapid blinks the Times menu is entered. See section "Times Mode" - Table 2
Normal status.
11