Miracle-Ear CHARGE start RIC/BTE Guia Del Usuario página 6

Troubleshooting
Charger Troubleshooting Guide
SYMPTOM POSSIBLE
CAUSES
Incorrect
hearing aid
orientation
No LED
indicator
when hearing
aids are
Charger is not
inserted into
plugged into an
the charging
external power
port/post
source (i.e. wall
outlet)
Red blinking
LED next
Fault occurred
to charging
port/post
10
SOLUTIONS
Reposition your hearing
aids in the charging port/
post.
Connect the power
supply cord to your
charger and plug into an
external power source
(i.e. wall outlet). The
hearing aid charging
LEDs will turn on for a
few seconds to indicate
connection to the power
source. If they do not,
contact your Miracle-Ear ®
Hearing Care
Professional.
Remove your hearing aids
from the charging port/
post, wait until the LED
turns off, then re-insert.
If the red blinking LED
persists, contact your
Miracle-Ear Hearing Care
Professional.
Charger Troubleshooting Guide
SYMPTOM POSSIBLE
CAUSES
Incorrect
hearing aid
orientation/
insertion
Hearing aids
whistling in
the charger
Charger is not
plugged into
an external
power source
(i.e. wall
outlet)
Troubleshooting
SOLUTIONS
Reposition your hearing
aids in the charging ports/
posts. Confirm that the
charging LED begins to
glow.
Your charger may not be
plugged into an adequate
external power source (i.e.
wall outlet). Test another
wall outet or power
supply to ensure charger
is powered. If you do not
have access to an external
power source, push and
hold the hearing aid's user
control for three seconds
to turn off.
11