Electrical Connection For The Uk - Miele SMUL1 Active Instrucciones De Manejo

Ocultar thumbs Ver también para SMUL1 Active:
Tabla de contenido

Publicidad

en
Crevice nozzle, 560 mm (SFD 20)
Flexible crevice nozzle for vacuuming
hard to reach places.
AP01/AP02/AP03 additional battery
(HX LA)
For doubling the amount of time the va-
cuum cleaner can be used for.
Before charging for the first time, you
must read the information in "Installa-
tion and connection" – "General bat-
tery information".
LS03 (HX LS) charger cradle
For charging the additional battery inde-
pendently of the appliance, i.e. while
the appliance is in use.
Before charging for the first time, you
must read the information in "Installa-
tion and connection – General battery
information".
Fine dust filter (HX FSF-2)
To continue achieving the best possible
cleaning results, replace the fine dust
filter that is fitted as standard with a
new one after approx. 3 years (see
"Maintenance – Cleaning the pre-filter
and fine dust filter").
84
Electrical connection for
the UK
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations (BS
7671 in the UK). The voltage and fre-
quency are given on the data plate loc-
ated underneath the vacuum cleaner.
Please ensure that these match the
household mains supply. The fuse rat-
ing is quoted on the plug. The appli-
ance is supplied with a cable and moul-
ded plug ready for connection to a
230-240 V/50 Hz a.c. single phase sup-
ply.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3422

Tabla de contenido