Setting The Volume; Fuel Optimisation - Palazzetti DISPLAY EASY Uso Y Funciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

3.3.2 Setting the display mode
The data shown on the display when this is in standby mode can be set.
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d)
Set one of the following values using the
The display remains on the last operation set by the user;
"
"
OFF
All operating parameters are displayed cyclically;
"
"
1
The room or water probe temperature is shown, based on the type of configuration
"
"
2
The current time is shown
"
"
3
The operating autonomy in hours before having to refill the hopper is shown, If the function
"
"
4
"filling" has been activated.
e)
Press
to confirm the settings.
3.3.3 Setting the display brightnes
Display brightness when in standby mode can be set.
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d) Set the desired brightness (

3.3.4 Setting the volume

The volume of the buzzer can be set based on requirements:
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu [
d) Set the desired volume (OFF, 1 to 5) using the

3.3.5 Fuel optimisation

Excellent fuel depends on different factors (type of installation, operating and maintenance conditions, type of pellets, etc.)
Generally speaking, if at the end of combustion, there is a lot of residue in the burn pot, you should change the combustion
configuration (by increasing the value) until you find the best solution.
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Scroll with the
key and select the submenu
"
"
1
"
"
2
"
"
3
d) Press the key
to confirm the set data.
22
to go to the setup menu
[12]
and
to go to the setup menu
[11]
) using the
OFF, 1 ... 5
to go to the setup menu
] and press
13
key and confirm with the
and confirm with the
[14]
and then press
;
to confirm;
and press
to confirm;
buttons:
and then press
;
to confirm;
and press
to confirm;
buttons and press
to confirm.
and then press
;
to confirm;
to confirm;
buttons and press
to confirm.
and press the
key;
key;
key;
004778911 - 26/01/2022

Publicidad

Tabla de contenido
loading

Tabla de contenido