Receiving calls
(HOLD)
(MUTING)
Additional tasks
To
Adjust the handset volume
Put a call on hold
Mute your voice
Switch to another call
("call waiting" service*)
Turn on/off the ringer of
the handset
* You need to subscribe to the service from your telephone company.
Note
If another call comes in by "call waiting" service while conversing with an
outside caller, you will hear two short beeps.
Tip
To inform you of an incoming call, the display shows "** RINGING **" when
ringing.
24
US
Basics
1
(CALL WAITING/ FLASH)
VOL switch
2
Do this
Set the VOL switch to H (high), M (middle) or L
(low).
Press (HOLD). "HOLD" appears on the display.
Press (HOLD) again to resume the conversation.
Press (MUTING) to disable the microphone.
"MUTING" appears on the display. Press
(MUTING) again to cancel.
Press (CALL WAITING/ FLASH).
Press (CALL WAITING/ FLASH) again to return to
the first caller.
See "Turning off the ringer of the handset" on
page 34.
When you hear the phone ring:
• Press (TALK).
or
• Pick up the handset from the base
phone when the handset is placed
on the base phone.
"TALK" appears on the display and
the display also shows the operation
duration in hours, minutes and
seconds.
"HANDSET IN USE" appears on the
display of the base phone and the
LINE lamp on the base phone lights
up.
When you're done talking, press
(OFF) or replace the handset on the
base phone.
The display and the LINE lamp on the
base phone go off.