Milnor MilTouch MWF27Z8 Serie Guía Del Operario página 17

4. Touch the Save Changes button
in the formula
5. Touch the Home button to go to the Home display
Supplement 2
Use the No Steam option unless your machine is configured for steam and connected to a
steam supply line.
No Steam—No steam is allowed in this bath step.
After, Runs—Steam starts only after the commanded bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer runs when the steam valve is open.
Stops—Steam begins only after the commanded bath level is achieved. After temperature is
first achieved, no more steam is allowed in the step. The timer stops running when the steam
valve is open.
After, Stops—Steam begins only after the commanded bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer stops running when the steam valve is
open.
Early, After, Runs—Steam starts when the lowest safe bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer runs when the steam valve is open.
Early, Stops—Steam starts when the lowest safe bath level is achieved. After temperature is
first achieved, no more steam is allowed in the step. The timer stops running when the steam
valve is open.
Early, After, Stops—Steam starts when the lowest safe bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer stops running when the steam valve is
open.
To Add a New Wash Formula
1.1.1.1.
2.
1. From the Wash Formula Maintenance display, touch the Add button.
2. The control names the new wash formula similar to
3. Touch the Rename button to change the wash formula name.
a. In the Formula Name window, touch the formula name.
b. Touch the [Clear All] button to erase the formula name that the controller provided.
c. Use the keypad to enter a formula name.
d. Touch the Accept button to write the new formula name to memory. The Wash Formula
Maintenance display appears.
4. Touch the Steps button beside a formula to add steps.
a. Touch the Add button. A new step appears with a step type of End Formula (00:00).
b. Touch the Step Type button to program the step. The Step Decisions display appears.
• For selection lists, touch the value you want to use.
• For fields that require a typed value, touch the value in the box at the top. When the
box changes color to orange, delete the current value. Touch the desired numbers or
letters to enter the new value. Finally, touch the checkmark button to save the new
value and go back one level. To abandon the most recent change, touch the Exit
button.
(Figure 4) to save the changes. The control displays the steps
(Figure 3).
About the Steam Codes
13
Chapter 1. How to Use the MilTouch
(Figure 1).
, where xx is a number.
[N] Formula - xx
PELLERIN MILNOR CORPORATION
™ Control