Milnor MilTouch MWF27Z8 Serie Guía Del Operario página 9

Chapter 1. How to Use the MilTouch
1.1. Using the MilTouch
1.1.1. The Home Display
1.1.1.1. The Wash Formula Maintenance Display
1.1.1.1.1. To Change an Existing Wash Formula
1.1.1.1.2. To Add a New Wash Formula
1.1.1.1.3. To Erase a Wash Formula
1.1.1.2. The Configuration Display
1.1.1.2.1. The Machine Configure Decisions
1.1.1.2.2. The Default Formulas by Laundry Type
1.1.1.3. The Data Transfer Display
1.1.1.4. Data Transfer with the MilTouch Programmer
Software
1.1.1.4.1. How to Mount a USB Flash Drive to the Machine
Controller
1.1.1.4.2. How to Save Machine Configuration Files
1.1.1.4.3. How to Transfer Machine Configuration Files to a
MilTouch Machine
1.1.1.4.4. How to Save and Transfer Wash Formulas
1.1.1.5. The Data Log Displays
1.1.1.5.1. The Date Selection Display
1.1.1.5.2. The Production Display
1.1.1.5.3. The Configuration and Programming Display
1.1.1.5.4. The Errors Display
1.1.1.6. The Inputs and Outputs Displays
1.1.2. The Run Display
1.1.2.1. The Names and Timers on the Run Display
Table of Contents
Sections
™
Control
® Control
(Document BICLUO01)
(Document BICLJO01)
5
Table of Contents
Figures, Tables, and Supplements
Supplement 1: MilTouch Simulator for
Windows PCs
Figure 1: The Home Display
Figure 2: The Wash Formula Maintenance
Display
Figure 3: The Steps in a Wash Formula
Figure 4: The Step Choices Display
Supplement 2: About the Steam Codes
Figure 5: The Configuration Display
Figure 6: The Password and System Clock
Display
Figure 7: The Data Transfer Display on the
Controller
Figure 8: The Data Transfer Display on the
Programmer Software
Figure 9: Date Selection Display
Figure 10: Production Display
Figure 11: Configuration and
Programming Display
Figure 12: Errors Display
Figure 13: The Outputs Display
Figure 14: The Inputs Display
Figure 15: The Analog-Digital Values
Display
Figure 16: The Zones of the Run Display
Figure 17: The Names and the Timers
PELLERIN MILNOR CORPORATION