Milnor MilTouch MWF27Z8 Serie Guía Del Operario página 33

Figure 29: File Transfer Display
.
7. Touch the Data Set Name button in the Machine Memory area on the right side of the screen.
8. Touch the Left Arrow button to export the formula set from the machine to the flash drive.
9. When the screen shows that the formula set was exported successfully, touch the Check
button to confirm.
10. Touch the Configuration Data button in the Machine Memory area on the right side of the
screen.
11. Touch the Default button.
12. Touch the Left Arrow button.
13. When the screen shows that the configuration was exported successfully, touch the Check
button to confirm.
14. Touch the Home button to return to the Home screen.
15. Remove the flash drive from the USB port.
How do I update the machine software?
2.1.3.
1. From the Home screen
screen (Figure 26).
2. Follow the instructions in the window about attached USB drives, then touch the Check
button.
3. Insert the flash drive that contains the update, then wait for the machine to recognize the flash
drive.
4. If the status light does not glow green within 5 seconds of inserting the flash drive, touch the
USB Mount button.
5. When the controller prompts that a new MilTouch version is available, touch the check box
to run the update. The controller signals when it begins initializing the update.
6. When the second update window appears, touch the Update MilTouch button to begin
copying the new software to the controller.
Screen
(Figure 26), touch the File Transfer button to view the File Transfer
29
Chapter 2. How to Update the Machine Software
Legend
A. Media Format Available
indicator light
B. Data Set Name/Default
button
C. Machine Memory area
D. Left arrow button
E. Right arrow button
F. Configuration Data
button
G. Home button
H. External Memory area
I. Software Update button
J. USB Mount button
PELLERIN MILNOR CORPORATION