Figure 7: The Data Transfer Display on the Controller
.
The Media Format Available indicator lights green when the software recognizes a connected
USB device.
1. Touch the External Storage button or the Internal Storage button to select the storage
location.
2. Touch the Transfer Wash Formulas button or the Transfer Configuration button to select
whether to copy the wash formulas or the machine configuration.
Figure 8: The Data Transfer Display on the Programmer Software
.
Typical View
Typical View
17
Chapter 1. How to Use the MilTouch
Legend
A.
Scroll buttons
B.
Transfer Direction
buttons
C.
Data Set Name button
D.
Transfer Wash Formulas
button
E.
Transfer Configuration
button
F.
Media Format Available
indicator
G.
External Storage button
H.
Internal Storage button
I.
Home button
J.
Copy Data button
K.
Rename Data button
L.
Delete Data button
M.
Update Operating
Software button
N.
External Media button
Legend
A.
Machine Memory Data
Set button
B.
Storage Location button
C.
Stored data area
PELLERIN MILNOR CORPORATION
™
Control