Bellman & Symfon BE1411 Manual De Usuario página 96

Default signal pattern
When the transmitter or a connected accessory is activated, the following happens:
1 The LED on the transmitter lights up in green to show that it is signalling the
receiver.
2 The Visit LED on the receiver lights up in green and it starts to sound, flash or
vibrate with a certain pace, called signal pattern. The transmitter determine the
signal pattern and the default is as follows:
Transmitter Visit receiver
Source LED LED
Internal mic. Green, top Green light
External mic. Green, bottom Green blinks
Doorbell con. Green, top 3x green blinks
Changing the signal pattern
The transmitter controls the signal pattern. Open the transmitter front cover and
move the signal switches according to the tables to change it:
190
Sound Vibration Flash
1x door chime, low Slow Yes
2x door chime, low Slow Yes
1x door chime, high Slow Yes
Transmitter Receiver signal pattern
Switch Source LED
Int. mic. / learned signal 1 / test Green light
Ext. mic. / learned signal 2 Green blink
Connected doorbell 3 x green blinks
Int. mic. / learned signal 1 / test 2 x green blinks
Ext. mic. / learned signal 2 3 x green blinks
Connected doorbell Green blinks
Int. mic. / learned signal 1 / test 3 x green blinks
Ext. mic. / learned signal 2 2 x green blinks
Connected doorbell 3 x orange blinks
Int. mic. / learned signal 1 / test Green blinks
Ext. mic. / learned signal 2 Green light
Connected doorbell Orange blinks
Sound Vibration Flash
1 x door chime, low Slow Yes
2 x door chime, high Slow Yes
1 x door chime, high Slow Yes
2 x door chime low Slow Yes
1 x door chime, high Slow Yes
2 x door chime, high Slow Yes
1 x door chime, high Slow Yes
2 x door chime, low Slow Yes
Baby melody Fast Yes
2 x door chime, high Slow Yes
1 x door chime, low Slow Yes App
Baby melody Fast Yes
191