Bellman & Symfon BE1411 Manual De Usuario página 97

Transmitter
Switch Source
Int. mic. / learned signal 1 / test Green light
Ext. mic. / learned signal 2
Connected doorbell
Int. mic. / learned signal 1 / test Green light
Ext. mic. / learned signal 2
Connected doorbell
Int. mic. / learned signal 1 / test 3 x green blinks
Ext. mic. / learned signal 2
Connected doorbell
Int. mic. / learned signal 1 / test Green blinks
Ext. mic. / learned signal 2
Connected doorbell
192
Receiver signal pattern
LED Sound Vibration
1 x door chime, low Slow
3 x green blinks 1 x door chime, high Slow
2 x green blinks 2 x door chime, low Slow
1 x door chime low Slow
Green blinks 2 x door chime, high Slow
Yellow blinks 2 x ring signal, high Medium
1 x door chime, high Slow
Green light 1 x door chime, low Slow
Red + orange blinks Emergency siren Long
2 x door chime, high Slow
2 x green blinks 2 x door chime, low Slow
Red blinks Fire alarm Long
Using electromagnetic detection
The door transmitter can be set to detect electromagnetic fields emitted by
Flash
electromechanical doorbells. Here is how it's done:
Yes
 Activating electromagnetic detection
Yes
Move the 4th signal-switch (1) to the Up=On
Yes
position.
Yes
 Deactivating electromagnetic detection
Yes
Move the 4th signal-switch to the
Down=Off position.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1
App
193