Height Adjustment Of The Swiveling Guide Fence - Mafell DDF40 Instrucciones De Funcionamiento Y Seguridad

4.7 Height adjustment of the swiveling guide fence

The height of the swiveling guide fence and thus the drilling distance to the support surface can be adjusted
continuously in a range between 6.5 and 60 mm [0.26 and 2.36 in] to the drill axis.
Use the following procedure to adjust the height
of the swiveling guide fence:
1. Loosen the wing screw (3) for the height
adjustment.
2. Using the setting wheel (7), set the required
height of the swiveling guide fence (1).
The height is indicated by the red pointer
➢
on the scale (2).
3. Tighten the wing screw (3).
Height of the swiveling guide fence
✓
adjusted.
Using the rotating turret stop (5), you can select one of five fixed preselected distances:
6.5 mm
[0.26 in]
In addition, a freely adjustable distance can be
selected. To do this, use the 2.5-mm Allen key
provided to turn the screw in the turret stop.
18
8 mm
[0.31 in]
Fig. 12: Adjusting the height of the swiveling guide fence
9.5 mm
[0.37 in]
Fig. 13: Adjusting the distance at the turret stop
11 mm
[0.43 in]
DDF40
12.5 mm
[0.49 in]
01/2022