DDF40
Use the following procedure to adjust the
swiveling guide fence:
1.
Loosen the wing screw (8) for the swivel setting.
2.
Swing the swiveling guide fence (1) to the
desired direction.
The angle is indicated by the red pointer
➢
on the scale (9).
3.
Tighten the wing screw (8).
✓
Swiveling guide fence adjusted.
4.6 Drilling depth setting
The drilling depth can be set continuously in a range between 0 and 40 mm [0 to 1.57 in] in 1-mm increments
[0.04 in].
Use the following procedure to adjust the drilling
depth:
1.
Press and hold the button on the depth stop "2"
and move the stop to the larger depth (2 - 40
mm | 0.08 - 1.57 in).
2.
Press and hold the button on the depth stop "1"
and move the stop to the smaller depth (0 - 38
mm | 0 - 1.50 in).
3.
Set the rotary button (6) as required to drilling
depth "1" or "2".
Drilling depth adjusted.
✓
01/2022
Fig. 10: Adjusting the swiveling guide fence
Fig. 11: Adjusting the drilling depth
17