Operation; Startup; Switching On / Off - Mafell DDF40 Instrucciones De Funcionamiento Y Seguridad

DDF40
5

Operation

5.1 Startup

These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".

5.2 Switching on / off

Use the following procedure to switch on the
machine:
1. Press down the power switch (4) until it
engages.
The machine is switched on.
✓
Use the following procedure to switch off the
machine:
1. Press the power switch (4).
The power switch jumps to the OFF
➢
position.
The machine is switched off.
✓
The power switch is blocked in the tool change position (
Check the setting of the rotary button (6).
01/2022
Fig. 14: Switching the machine ON/OFF
)!
19