Installation; Connection To The Water System - Fulgor Milano F7PBM36S1-R Manual De Usuario

Ocultar thumbs Ver también para F7PBM36S1-R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. IMPORTANT DIRECTIONS
EN
control panel or when the ice dispenser has not
been used for more than 30 days.
>
With each filter replacement, sanitise the ice
distribution system using a food grade disinfectant
(with sodium hypochlorite), which does not alter
the characteristics of the materials. Rinse with at
least 2 litres of water before use.
>
Only original spare parts supplied by the
manufacturer should be used when replacing
components in the ice dispenser.
>
Any work on the appliance must be carried out
by a qualified technician or the After-sales Service.
Warning
To avoid contamination of food, please
respect
> Opening the door for long periods can cause
a significant increase of the temperature
in the compartments of the appliance.
>
Clean
can
come
and
accessible
> Clean water tanks if they have not
been used for 48 h; flush the water
system connected to a water supply if
water has not been drawn for 5 days.
> Store raw meat and fish in suitable
containers in the refrigerator, so that it is
not in contact with or drip onto other food.
>Two-star frozen-food compartments are
suitable for storing pre-frozen food, storing
or making icecream and making ice cubes.
> One-, two- and three-star compartments
are not suitable for the freezing of fresh food.
> If the refrigerating appliance is left empty
for long periods, switch off, defrost, clean,
dry, and leave the door open to prevent
mould developing within the appliance.
8
the
following
instructions:
regularly
surfaces
in
contact
with
drainage
systems.

2. INSTALLATION

2.1 Installation
Make sure that installation is performed correctly,
adhering to all directions in the specific installation
manual provided with the appliance.
Warning
Always connect the water before the
power.

2.2 Connection to the water system

that
food
The models provided with Ice Maker require a
connection to the domestic water supply system.
This can be executed through the 1/4" water line
(copper or polyethylene)to the house water supply.
The system pressure must be between from 8 psi
to 75 psi (between 0.5 bar and 5 bar).
Different pressures can cause malfunctions or
leaks in the water system.
The appliance should be supplied only with
drinkable water.
Warning
The appliance should be supplied only
with drinkable water.
Warning
Make sure that installation is performed
correctly,
directions in the specific installation
manual provided with the appliance.
Warning
Do not attempt to use a locally sourced
garden hose threaded adapter or braided
supply line. It will strip the threads on
the appliance water connection solenoid.
according
to
all
of
the

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

F7pbm36s1-lF7ibm36o1-rF7ibm36o1-l

Tabla de contenido