Installation - Fulgor Milano FBR 300 F ED Manual De Usuario

This appliance must never be installed close to heat
sources, e.g. heating elements or cookers, nor in
damp places.
Seek the help of another individual, or two, when
installing this appliance. This appliance may have
sharp edges. Wear adequate PPE for the task and
environment.
• To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
• The cooling system at the rear of the appliance must not
touch the rear wall. The greater the gap, the better.
• The appliance must be installed with adequate ventilation.
Ensure that there is clearance above the appliance to allow
air to escape and that there is space between the rear of the
appliance and the wall.
Fig. 5
7 - Installation preparation
Install the appliance at a location where the ambient
temperature corresponds to the climate class indicated on the
rating plate of the appliance:
- Extended temperate (SN): 'this refrigerating appliance is
intended to be used at ambient temperatures ranging from
10 ˚C to 32 ˚C'
- Temperate (N): 'this refrigerating appliance is intended to be
used at ambient temperatures ranging from 16 ˚C to 32 ˚C'
Subtropical (ST): 'this refrigerating appliance is intended to
be used at ambient temperatures ranging from 16 ˚C to 38
˚C'
- Tropical (T): 'this refrigerating appliance is intended to be
used at ambient temperatures ranging from 16 ˚C to 43 ˚C'
Fig. 6
EN
11