Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND CIRCUIT
The circuit-breaker isolates the console unit power supply.
After each use, set the circuit breaker back to OFF.
NOTE:
The battery couplers allow the engines to be started either with one battery per engine,
or by coupling the batteries (in parallel), or with a single battery.
III-2-5-7-Table of possible configurations
COUPLER STATE
COUPLER 1 SET TO "OFF"
COUPLER 1 TO "BAT 1"
COUPLER 1 TO "BAT 1"
COUPLER 1 TO "BAT 2"
COUPLER 1 SET TO "BOTH"
COUPLER 2 SET TO "OFF"
COUPLER 2 TO "BAT 2"
COUPLER 2 TO "BAT 1"
COUPLER 2 TO "BAT 2"
COUPLER 2 SET TO "BOTH"
29
RESULT
THE ENGINES AND THE
BATTERIES ARE ISOLATED
EACH ENGINE STARTS WITH
ITS RESPECTIVE BATTERY.
ALWAYS PUT THE COUPLERS
IN THIS CONFIGURATION
BOTH ENGINES START WITH
BATTERY 2 (used when battery
1 fails)
BOTH ENGINES START WITH
BATTERY 2 (used when battery
1 fails)
BOTH ENGINES ARE STARTED
BY COUPLING THE 2
BATTERIES
E
N
G
L
I
S
H
Publicidad
Tabla de contenido
