Lenco CD-400GY Manual De Usuario página 10

5. LCD DISPLAY
Display the unit operation status and information
6. / TU+
DAB+: Press to display the next station information
FM: Short press to change the frequency, step up 0.05MHz. Press and hold to scan a higher frequency
available station
CD: Press to search to the next track
7. / TU-
DAB+: Press to display the previous station information
FM: Short press to change the frequency, step down 0.05MHz. Press and hold to scan a lower frequency
available station
CD: Press to search to the previous track
8. MENU / INFO
DAB+ / FM: Press to display station information. Press and hold to enter the Menu for setting change
9. P-MODE / PRESET
DAB+ / FM: Press to recall a preset station. Press and hold to store a preset station
CD: Press to select different play modes
10. SOURCE
Press it to choose different modes: DAB+ / FM / CD
11. ON / SCAN / PLAY/PAUSE
Standby or OFF mode: Press and hold to turn on the unit
DAB+: Press and hold to start auto-scanning all the available DAB+ stations
FM: Press and hold to start auto-scanning all the available FM stations
CD: Press to toggle between pause and resume playback
12. OFF / ENTER / STOP
On mode: Press and hold to turn the unit into standby mode (with display of time and date). Press and hold
again will turn the unit to the OFF mode for power saving (without display)
DAB+ / FM: Press to select the change setting in the menu operation
CD: Press to stop the playback
13. CD DISC COMPARTMENT DOOR
14. DC IN JACK
Connect to an external AC/DC adaptor (not supplied), DC 5V 1000mA
15. USB DC IN
Connect to an external USB AC/DC adaptor (not supplied), DC 5V 1000mA
16. CD DOOR OPEN SLIDE SWITCH
Slide to eject the CD disc compartment door
10