Lenco CD-400GY Manual De Usuario página 21

4. Press the or
5. Press the or
6. Press the
your desired and then press the ENTER button to confirm.
7. Press the MENU button repeatedly to exit the menu control.
Language Setup
You can set the language of the unit.
1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the or
4. Press the or
5. Press the
then press the ENTER button to confirm.
6. Press the MENU button repeatedly to exit the menu control.
Software Version Check
You can check the software version of the unit.
1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the or
4. Press the or
software version number.
5. Press the MENU button repeatedly to exit the menu control.
Factory Reset
This function resets the unit to the original factory settings.
1. Turn on the unit in DAB+ mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the or
4. Press the or
5. Press the or
BATTERY LEVEL SAVING
In order to save the battery consumption, the unit in CD mode pause or without playback for 1 minute will
automatically turn off to the standby mode.
button until "Time" is displayed and then press the ENTER button.
button until "Set date format" is displayed and then press the ENTER button.
or button to toggle between "DD-MM-YYYY" or "MM-DD-YYYY" date display. Select
button until "System" is displayed and then press the ENTER button.
button until "Language" is displayed and then press the ENTER button.
or button to toggle between different languages. Select your desired language and
button until "System" is displayed and then press the ENTER button.
button until "SW version" is displayed and then press the ENTER button to show the
button until "System" is displayed and then press the ENTER button.
button until "Factory Reset" is displayed and then press the ENTER button.
button until "Yes" is displayed and then press the ENTER button to reset the unit.
21