Anti-Shock Protection - Lenco CD-400GY Manual De Usuario

ANTI-SHOCK PROTECTION

The unit has an electronic anti-shock protection function to prevent any interruption of the sound output when
the unit is subjecting to shock or vibration during disc playback. The unit's internal buffer can provide a typically
40 seconds when playing a CDDA disc and typically 100 seconds when playing a CD-MP3 disc of protection against
interruption of sound output. If the player is subjected to shock or vibration for a longer time that the buffer is
full, some interruption of sound output will occur. This is normal. The sound will resume once the unit is stabilized
from the shock or vibration.
Note:
- The anti-skip function provides for continues sound output when the unit is subjected to shock or vibration.
It will not compensate for errors arising from the use of defective, scratched or dirty discs.
BBS
You can enhance the bass effect of the music. Press the BBS button will toggle the bass boost between ON and
OFF.
BUTTON HOLD FUNCTION
To avoid any accidental button press during opeation, the unit has a function of button hold. When the unit is
turned on, set the HOLD SWITCH to ON position. Locked symbol will be shown on the LCD display. To release the
button lock, slide it to OFF position
SYSTEM MENU OPERATION
Press and hold the MENU button to access the menu control. Press the
displayed and then press the ENTER button. Press the
below.
Time Setup
This setup allows you to setup 4 different display modes. They are:
● Set Time/Date
● Auto update
● Set 12/24 hour
● Set date format
Set Time/Date
1. Turn on the unit in DAB mode or FM mode.
2. Press and hold the MENU button to access the menu control.
3. Press the or button until "System" is displayed and then press the ENTER button.
or button for different options as described
19
or button until "System" is