Lenco CD-400GY Manual De Usuario página 16

Storing FM Presets
You can save up to 30 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the PRESET button, "Preset Store" will be displayed.
3. Press the or
4. Press the ENTER button to store.
Recall Stored FM Presets
1. Press the PRESET button, "Preset Recall" will be displayed.
2. Press the or
3. Press the ENTER button to recall.
Displaying FM Station Information
There are several types of information as listed below. To change the display information, press the INFO button
repeatedly.
1. Radio Text
Scrolling text which shows information about music titles or program details provided by the radio station
2. Programme Type (PTY)
Type of program provided by the broadcaster
3. Frequency
Current channel frequency
4. Audio Type
Stereo or Mono
5. Time
Display the time
6. Date
Display the date and year
FM MENU OPERATION
Press and hold the MENU button to access the menu control. Then press the
options as described below.
Scan Setting
1. Press and hold the MENU button to access the menu control.
2. Press the or
3. Press the or
button to confirm. When the "Strong stations only" is selected, scanning will ignore the noisy stations and
only capture the strong stations. When "All stations" is selected, all possible stations will be captured during
scanning even if it is a bit noisy.
4. The next time doing the scanning the unit will search for the stations based on this scan setting.
button to select the desired preset number to store.
button to select the desired preset number to recall.
button until "Scan setting" is displayed and then press the ENTER button.
button to toggle between "Strong stations only" and "All stations". Press the ENTER
16
or button for different