Basic Operation - Lenco CD-400GY Manual De Usuario

USB AC/DC Adaptor (Not Supplied) Charging
The rating of the USB AC/DC adaptor (Not supplied) should be input AC 230V~ 50Hz and output DC 5V 1000mA.
Connect the end of the USB AC/DC adaptor to the unit's USB jack by the USB charging cable (supplied). Plug in the
USB AC/DC adaptor to the AC outlet.
AC/DC adaptor (not supplied)
USB AC/DC adaptor
(not supplied)
USB charging cable (supplied)

BASIC OPERATION

Connect the earphone (included) into the PHONES OUT on the side of the unit.
AC/DC Adaptor (Not Supplied) Operation
Press and hold the ON button to turn on the unit. To turn off to the Standby mode (with display of time and date),
press and hold the OFF button.
Built-in Battery Operation (AC/DC Adaptor NOT Connected)
Press and hold the ON button to turn on the unit. To turn off the Standby mode (with display of time and date),
press and hold the OFF button. Press and hold the OFF button again will turn the unit to the OFF mode for power
saving (without display).
DAB+ / FM / CD
Press the SOURCE button to select between different sources.
12